Autel diagnostic tools are among the most widely used platforms for ADAS calibration in professional auto repair shops across the United States. With the right target boards and a proper understanding of the calibration workflow, technicians can complete LDW and other ADAS calibrations efficiently and accurately. Here is a step-by-step overview of the process.

Step 1: Prepare the Calibration Area

ADAS static calibration requires a flat, level floor surface with a minimum of 10 feet of clearance in front of and behind the vehicle. The area must be well-lit but free of direct glare or reflective surfaces that could interfere with the camera. Remove any obstacles from the calibration zone before positioning the vehicle.

Step 2: Position the Vehicle

Drive the vehicle into the calibration bay and ensure it is centered on the floor. Check tire pressures and confirm the vehicle is at curb weight with a full fuel load where specified by the OEM. Use a plumb line or laser to confirm the vehicle centerline for accurate target placement.

Step 3: Set Up the Target Board

Position the ADAS Parts Express LDW target board at the distance specified by Autel software for the vehicle make and model. Use the measurement guidelines provided with the target board to center it precisely on the vehicle axis. Ensure the board is level and vertical — use a spirit level to confirm.

Step 4: Connect and Run Autel Calibration

Connect your Autel scan tool to the vehicle OBD-II port. Navigate to ADAS calibration in the software menu, select the correct vehicle and system, and follow the on-screen instructions. The software will guide you through the camera calibration sequence, display live camera feed, and confirm when calibration is successful.

Step 5: Verify and Document

After calibration, perform a test drive to verify the LDW system responds correctly to lane markings. Document the calibration in your shop management system and provide the customer with a calibration report. Proper documentation protects your shop from liability and demonstrates the value of the service.

ADAS Parts Express target boards are built to work seamlessly with the Autel calibration workflow. Browse our full product catalog to find the right board for your most common vehicle makes.